Netflix Auto-Continue Script

If you’re also annoyed by Netflix’

  • inter-episode continue screens that wait 15 seconds before proceeding to next episode
  • ~90 minutes idle “continue” question which results in timeout error if you don’t press it

then I have something for you – a Javascript (to be used with GreaseMonkey in Firefox, or Blank Canvas Script Handler in Chrome).

No more annoying Netflix pauses!

Windows 10: Cannot install fonts / fonts considered invalid? Here’s why and how to fix.

In case you were as careless as I was when doing the free Windows 10 update, you might have noticed the following behavior when trying to install fonts using any possible method.

font2 font1

After downloading various fonts again and again from different sources and the issues remained, I googled a bit further.

Guess what – Microsoft Windows Firewall Service must be running/enabled in order to install fonts. So just quickly enable and start the Windows Firewall service (run “services.msc” or go the long way), and try to install the fonts again. Tada, works.

Microsoft at its best. It’s not like issues like this are rare with Win10, maybe you’ve also experienced the odd issue that I currently have: being able to only establish one VPN connection per Windows session, after that VPN connection attempts result in various errors. Once you reboot, it’s fine again. And then the taskbar search, Cortana, etc., all not functioning.

Hm, how can I phrase that experience nicely….


(I’m not downgrading again though, not yet, Win10 is speedy and has its advantages.)

JQuery rotate element on hover example

I needed a Javascript example for rotating elements on hover via jQuery, but couldn’t find any. So made one myself – in case someone finds it useful:


Put your old tablets to good use – as info-panels!

infopanelBy now I’m owning several tablets that I don’t use for anything, they’re just collecting dust. But they’re too slow/old for using them for anything fun or important – so now I’ve found a good use for them: as info-panels on the wall.

What that means is: I place various useful widgets (email, rss-reader, news, weather) on multiple homescreens, and let the tablet switch between the homescreens every 5 minutes.

This way I always have my emails, feeds, posts, notes, news, weather, server-checks and tons of other useful information in direct view.



  • With your launcher, create as many homescreens as you need, e.g. 2 or 3. You should leave one homescreen for standard links to apps you need, app drawer, launcher settings, etc.
  • Place all widgets you might find useful on your homescreens – make sure not to leave any unused space. With e.g. Apex Launcher you can disable margins, which is a good idea.
  • In your display settings, set text size to huge – so you can also read text from further away.
  • switch_homesWhen satisfied with the widgets positioning and amount, open Tasker app, and create a “Task” with this rules:
    Go Home (Page 0),
    Wait 5 minutes,
    Go Home (Page 1),
    Wait 5 minutes,
    Go Home (Page 2),
    Wait 5 minutes,
    Goto Action Number 1;
    (as seen in this screenshot)
    Of course modify it so it fits to your homescreen-amount and numbers, waiting times, etc. – you may also first want to set it to 5 seconds instead minutes for testing, to see if it works as it should. Tap the play icon and watch.
  • Put the tablet into the wall mounting system and enjoy :)



Jailbreak iOS 8-8.1.2 easily via Taig Tool

taigtoolLast time I checked, there was no working Jailbreaking tool available for iOS 8+ … well, that’s changed. I’ve just successfully jailbroken my iPad Mini (iOS 8.1.2) with the “Taig Tool”. Not sure what to think of it from a security standpoint, but the Jailbreak def. worked nicely and very easily – finally I have Cydia available again now, which makes my iOS device a little less useless. :)

September 11 – The New Pearl Harbor

By now, there are countless videos on Youtube that count all the odd events and unanswered questions about 9/11, an avalanche started with the video “Loose change“. I must say, many of those videos are fixated on some pixel artifacts, bad cameras or they’re mostly based on assumptions.

But there’s one rather new video that asks 50 questions that have not been answered yet, and it’s doing so on a scientific basis – e.g. with the help of the Architects & Engineers for 9/11 Truth.

This means this video with the name “September 11 – The New Pearl Harbor” is the next generation of 9/11 conspiracy videos, which answers to all the “debunkers” who tried to defame the first people that asked questions. Imho a must-see (may take a bit before it starts):

Related links:


Using your own domain as DynDNS service

  Users who have their domains registered at namecheap can easily enable their own dynamic DNS service for it – just like

So register a domain, login, get to the domain management and select your domain. On the next page, click “Miscellanous -> Dynamic DNS” and enable it.

The next step is to configure a dynamic DNS updater for your DynDNS service. On Linux, just install the ddclient package (“apt-get install ddclient“) and edit /etc/ddclient.conf (“nano /etc/ddclient.conf“).

For use with a namecheap-based dynamic DNS service via own domain, the configuration file would look like this:

use=web,, web-skip=’IP Address’

So instead for “” you enter your domain;
for “Password” you enter the password displayed in the namecheap DynDNS management page;
for “mysubdomain” you enter the subdomain of your domain that’s supposed to lead to your IP.

When configured,  the ddclient will refresh the domain every 60 seconds with your IP.



HMA! Pro VPN Android App Final available!

The final version of the HMA! Pro VPN App for Android has been launched in the GooglePlay store:


The app works via OpenVPN-UDP protocol and spares you the trouble of configuring the VPN – just enter username+password, select a server and connect :)


Oh, and if you’re looking for a way to automatically connect to the VPN via NFC tags / stickers, then you should read this article; That way you can easily connect to the VPN by just holding your phone near a NFC tag. Nice!


In case you’re an iOS freak – of course there’s also a HMA! Pro VPN App for iOS users.

Demonstration video:

Modifying Dropbox folders from Linux command-line

There are quite a few methods to access and modify your Dropbox content from Linux command-line, but this one is far the best. It’s called “Dropbox-Uploader” by Andrea Fabrizi, but it can do basically anything; far more than just uploading stuff.

Download the script, make it executable, put it in /usr/bin and start it:

chmod +x
mv /usr/bin/

Original links: GitHub Page &

Follow the instructions displayed by the script – which are:

1) Open:
2) Click on “Create App”, then select “Dropbox API app”
3) Select “Files and datastores”
4) Now go on with the configuration, choosing the app permissions and access restrictions (a/f) to your Dropbox folder
5) Enter the “App Name” that you prefer (e.g. MyUploader1234123)
6) Click the “Create App” button
7) Type or copy+paste the app key, app secret and permission type shown in the confirmation page.
8) Visit the URL mentioned by the script (looks like this:
9) Confirm that you want to allow the app to access your Dropbox, and press enter in the script; it will exit now.
10) Run the script again to get all commands displayed:


         upload   <LOCAL_FILE/DIR …>  <REMOTE_FILE/DIR>
         download <REMOTE_FILE/DIR> [LOCAL_FILE/DIR]
         delete   <REMOTE_FILE/DIR>
         move     <REMOTE_FILE/DIR> <REMOTE_FILE/DIR>
         copy     <REMOTE_FILE/DIR> <REMOTE_FILE/DIR>
         mkdir    <REMOTE_DIR>
         list     [REMOTE_DIR]
         share    <REMOTE_FILE>

Optional parameters:
        -f <FILENAME> Load the configuration file from a specific file
        -s            Skip already existing files when download/upload. Default: Overwrite
        -d            Enable DEBUG mode
        -q            Quiet mode. Don’t show messages
        -p            Show cURL progress meter
        -k            Doesn’t check for SSL certificates (insecure)

The rest is pretty self-explaining – e.g. type:

  • upload filename.ext foldername/filename.ext
  • upload foldername foldername
  • delete foldername/subfoldername
  • move foldername/filename.ext otherfolder/otherfile.ext
  • delete foldername/filename.ext
  • mkdir newfolder

and so on…

Auto-mounting TrueCrypt volume + starting apps

For a long time I was missing a proper way to auto-mount my TrueCrypt volume and start apps stored in it (yeye, I know, that reduces the security somewhat).
Although TrueCrypt has some auto-mount feature, that never really worked for me.

So googled a bit, found this useful batchfile that does the trick for me;
You’ll need to modify the parts I marked bold accordingly to meet your files’n’other stuff.
Means, make sure that

  • tcexec leads to your truecrypt.exe file (so path where TC is installed)
  • mountdrive is the drive letter you want to use for mounting the container
  • volumefolder is the path where the volume file is stored
  • volumename is the filename of the volume file
  • MyTrueCryptContainerPassword is the password you’ve set for your container

Then save it as e.g. “mounttc.bat” and test it.
You can download the file as well from here: mounttc.bat

@echo off
SET tcexec=“%PROGRAMFILES%\truecrypt\truecrypt.exe”
SET mountdrive=z
SET volumefolder=“F:\Data\Secure”
SET volumename=DATA
IF EXIST %mountdrive%: goto DriveExists
IF NOT EXIST %volumefolder%\%volumename% goto NoVolume
IF NOT EXIST %tcexec% goto noTCREM Mount volume
cd %volumefolder%
%tcexec% /v %volumename% /l%mountdrive% /a /q /p MyTrueCryptContainerPassword
if ERRORLEVEL 1 GOTO mountfail
if ERRORLEVEL 0 GOTO startprograms:startprograms
REM ******************************
REM ** Start your programs here **
REM ******************************
start “” “z:\notes\pnotes.exe
start “” “z:\keepass\keepass.exe”REM ********************************
REM ** END of Program Start block **
REM ********************************goto end:mountfail
echo Truecrypt failed to mount volume.
goto end

echo Cant find truecrypt at: %tcexec%
goto end

echo Identified volume does not exist: %volumefolder%\%volumename%
goto end

echo Drive letter %mountdrive% already exists, cannot mount truecrypt volume
goto end


Funny videos that are actually funny

I’m usually not in the habit of quoting funny videos, since most videos considered to be funny are actually just morons recorded with a camera doing stupid things.
But these really made me laugh :)

First there’s “Badman”, who’s obviously far far kewler than Batman.

Make sure to watch the other Badman-Videos @

Next there’s “Precious Plum”, a parody of “Honey Boo-Boo”. Must-see :)

Check the other Precious Plum videos @

EA belongs stoned for the Android DK version. Get the original for Android here:

First I was happy to see Dungeon Keeper in the GooglePlay market , since part one of the PC version was an endless source of fun. So installed, played tutorial and tested all featured. Up to that point it was quite fun.

But suddenly one is forced to buy “gems”, that’s the ingame credit currency. A usable amount of gems costs 80 EUR. Now I admit, in-app-purchases are a great option to offer nice apps/games to endusers for free – as long as it is only to get premium content or make the gameplay easier/faster. Thousands of apps have proven that this system works and that it’s not difficult to find a compromise that keeps the game enjoyable even if you don’t spend a single cent, while still generating decent earnings for the developer from optional premium content sales.

Again, it’s obviously extremely easy not to piss of all the users, e.g. by

  • users being able to get free credits by watching advertising videos
  • or doing surveys
  • or installing apps from other developers
  • allowing to exchange different types of credits with each other
  • etc… the possibilities to give credits for tasks / advertising or other things are basically endless.

In short, as long as the developer leaves users a way to enjoy the game without having to spend money, while mainly using in-app-purchases for premium content / making the game easier or faster, then the system works.

EA has proven here how not to do it, just like they did with their Simpsons-TappedOut game. Once you played the tutorial of Dungeon Keeper, you’re forced to buy gems in order to keep playing – otherwise you need to wait days for a single action to complete, while being unable to do additional actions simultaneously.

It’s a huge money scam. As a result I have installed DungeonKeeper Gold (PC-version) on my Android device via a DOSbox emulator – get it here:

The archive contains everything you need:

Of course you can use any other DOSBox emulator for Android, but you’ll need to optimize the config file manually then to ensure that sound is working and the game is not lagging. Cycles should be set to max, for the necessary Sound-settings see the config file for AnDOSBox.


WhisperPush, RedPhone and TextSecure – Must-have apps to protect your privacy by encrypting SMS and calls

Secure Mobile CommunicationAfter installing the custom ROM “ProBam Kitkat” (which is great, by the way), my attention was brought onto a few things I should have used long ago already.

WhisperPush is a system for encrypting SMS & MMS. It’s integrated into CyanogenMod, and has now luckily also been integrated by default into various other Android custom-ROMs. For explanation, WhisperPush is the name for the SMS encryption client that is used on various stock ROMs.

It is based on and compatible to TextSecure – that again is an app everyone can install on his Android device to encrypt SMS & MMS independent of what ROM is being used.

Then there’s also RedPhone – which does the same, but for your calls. As for most client-to-client encryption tools, the connection and content is only encrypted when your call/SMS partner is also using a compatible encryption tool.

If your partner is not using a compatible encryption tool, neither him nor you will notice any difference in quality or handling, everything works as usual.

To summarize all the mentioned apps and other things:


mIRC plugin FiSH for encrypting chat traffic – hide your queries from serverOps!

If you know a bit about how IRC-chats exactly work, then you should be worried about your privacy – especially how easily it is for server-admins to read your private messages.

Sure, you could exclusively use DCC-chats instead of normal queries (PMs). But usually they get as often properly established as the DCC-file transfers (never), so you’ll revert back to normal queries most of the time, if not always.

Since the administrators of IRC-servers (server-ops) can read your private messages within an IRC network easily in plaintext, you should just always expect that everything you type in queries is as publicly visible as posting them in an open channel.

Luckily there’s a mIRC plugin that can help this by encrypting all traffic with blowfish. Of course this only works if your chat partner is also using this plugin – otherwise the chat reverts back to plaintext. So if you’re worried about your private messages in IRC, get you and your usual chatpartners to install the FiSH plugin.

I’m not aware of such a plugin for xChat, though since mIRC is better in all regards anyway, this should be just another reason to switch to mIRC.

Let’s summarize what you’ll need:

The installation is pretty straight-forward and mentioned in the README.TXT of the archive. Here’s the important part:

Don’t shy away, the guide below is just verbose, installing is easy!
Setting up FiSH 10 should be pretty straightforward as patching mirc.exe is no longer
required. If you have been using FiSH.dll before, it is however strongly recommended
that you restore mirc.exe to its unpatched, original state before you install FiSH 10.
You can of course apply a “crack” after that, but mIRC is a good product, so if you use
it every day, I strongly advise you to get a legit lifetime license.
Alright, now on to the actual installing procedure. If you have not been using FiSH.dll
before, or if you are installing mIRC 7 from scratch, you can skip this paragraph.
1. Unload FiSH.mrc from mIRC like so: `//unload -rs $shortfn($nofile($mircexe) $+ FiSH.mrc)`
2. (Unload `blow.mrc`, `blowcrypt.mrc`, `mircryption.mrc`, etc.)
3. Delete `FiSH.dll`
4. Delete `FiSH.mrc`
5. (Delete `DH.dll` `blowfish.dll` `bloW.dll`)
6. Keep! `blow.ini`
Now that your mIRC installation is clean, we can move on to the actual installing part.
* Download the latest zip file from
(if you haven’t already)
* Shut down mIRC!
* Extract fish_10.dll, fish_inject.dll and fish_10.mrc to your mirc.exe folder.
Do the same with libeay32.dll and ssleay32.dll if your download contains them.
* If necessary, extract blow.ini-EXAMPLE and rename the file to “blow.ini”.
* You can edit fish_10.mrc if your blow.ini is at a different location than that folder.
* This is useful for people who installed mIRC into Program Files but keep their settings
in the Users/AppData folder.*
* Start mIRC back up. If your mIRC is automatically connecting on startup, you might
have to turn that off, or add a timer. It is extremely important that fish_10.mrc
always loads before ANY IRC connection is made.
* Install the script: //load -rs $shortfn($nofile($mircexe) $+ fish_10.mrc)
* Shut down mIRC, and start it again
* Two lines like this should show up (and no error popup):
*** FiSH 10 *** by [c&amp;f] *** fish_inject.dll compiled XXX XX 2011 12:00:00 ***
*** FiSH 10 *** by [c&amp;f] *** fish_10.dll     compiled XXX XX 2011 12:00:00 ***
* If that is the case, FiSH 10 is now ready for action!
* Connect to your networks and do your thing.

TrueCrypt containing hidden spyware?

TrueCrypt - Secure?If you’re using TrueCrypt to save any data secure and encrypted, maybe passwords and other login-data, maybe whole partitions, then keep reading. TrueCrypt claims to be open-source, so you might think “someone surely has analyzed its code to make sure it doesn’t send all my data to someone”.

Yea, you’d think that. I did, too. Until I was made aware of the fact that this hasn’t been done yet. Please read and forward:


Oh, and a bit offtopic, but also a very interesting article about SDcards and the fact that they’re not as secure as we think:

2 free Android MMORPGs worth all your time

The Google Play market is full of MMORPGs – but the result of testing lots of them is: They’re mostly trash. But there are 2 remarkable exceptions: Avabel & Arcane Legends.

Both cause the known the known WoW effect very quickly and easily: “Just one level, then I can go to sleep!”. So you’re quickly spending all your free time on them and forget any social interactions. They’re almost perfect – Arcane Legends for example, achieves an easy-to-play mix of Diablo and World-of-Warcraft, while Avabel delivers astonishing graphics. Give them both a try – see videos below:

Google Play links:

Google Chrome’s data compression feature for faster browsing? Be careful!

Users of the Google Chrome browser for Android or iOS now have a new feature available: the data compression setting (Settings > Bandwidth Management > Reduce data usage). It promises faster browsing on all pages except SSL (https) or when using incognito mode – and yeah, it delivers. Browsing is noticeable faster, less data is being transferred. I’m just shocked how many people gladly use it without even knowing how it works.

In short: All your traffic will be sent and received through Google Proxyservers, which compress the data before transferring it to you. This results in less data usage and quicker loading of websites.

So far, so good – but what do you think gets done with all the data you gladly provide Google with? Of course it gets logged, saved permanently, used for advertising purposes and more. Even with SSL (https) traffic excluded, so that your onlinebanking for example is still secure, this remains a tool you should not use unless you’re okay with Google knowing every single byte you send and receive. Probably you also have a Google account, so all the data is linked to your identity not just by IP, but also by all the data Google already has on you.
Google might say otherwise, but don’t be dumb – don’t believe everything you’re told.

Google info page about data compression proxy:


Game Killer / Game Hacker not working for you? Here’s a fix.

If you’re using cheating tools like “Game Killer” or “SB Game Hacker” on Android, and they stopped working since you’ve updated your ROM – e.g. hanging, not reacting to input, keys not displaying – which happened for me on SGS4-i9505 using PacManRom Nightly – then keep reading.

The issue is related to being rooted – which you need to be anyway to use the apps – but I’ve noticed that ROMs using Superuser as root-tool seem to have problems with game modification tools. There’s an easy fix:

Superuser itself seems to be the problem – so I tried to use SuperSU instead – et voila, everything works perfectly again after starting SuperSU and patching the SU binary (I used the “normal” method)

So in short – try installing SuperSU, run it, let it patch the SU binary and test if Game Hacker / Game Killer work properly again.

Related links:


Oh, and by the way – the same goes if you have problems with the app FolderMount – that App2SD-mover that moves directories to SD and mounts them there. A wonderful and useful tool for ROMs/devices that don’t support moving apps to external SD card due to kernel limitations.
If not working, install SuperSU, run it and let it patch – and FolderMount works again.

Alternatives to Windows’ primitive copy function

You’re copying files from A to B with the standard copy function of Windows? Okay, that may be sufficient for small and few files, but you’re probably getting angry each time you need to copy many and/or big files. Obviously, since the Win copy function…

  • can’t resume the copy process (if aborted, you have to begin from start)
  • is very slow
  • is unreliable
  • offers not a single setting
  • offers no filters (e.g. overwrite if file is different etc.)

Years ago, the first good alternative to the Windows copy function was the application TotalCopy. It offered exactly what is needed, but it doesn’t work well with newer Windows versions.

The best copy tool at the moment is FastCopy:

BOINC and Seti@Home – What’s that & why should I use it?

I’ve mentioned BOINC & Seti@Home various times on my blog already (see related posts below), described ways to get it work on alternative devices, recommended related tools etc.

But I haven’t really told those who don’t know it what it actually is and does – and especially why you – everybody – should use it; if alone as screensaver, so that your normal work is not being affected.

But let’s start at the beginning: What is BOINC & Seti@Home?
In short, BOINC is an application available for various operating system that uses your systems free resources (CPU/GPU power) for processing calculations. What calculations? Well, that depends on what project you’re going to attach your BOINC client application to. Each project has different aims, goals and purposes. A list with descriptions of available projects can be found here:

For example, there are projects that use your machines spare processing power to research new medical drugs, find prime numbers, predict earthquakes, map the universe, etc.
The most projects are either doing something for the greater good of humanity, processing mathematical or cryptographic calculations, etc… So you just need to download the BOINC client for your machine, select a project that meets your interests and let it run. You get rewarded with points to climb up a ranking list – this is just to see your progress compared to other users or teams.

Now the project I’m using is also one of the most famous and oldest – Seti@Home. If you haven’t heard about it yet, Seti stands for “Search for Extra-Terrestrial Intelligence” – so search for life in outta space. That may sound odd, but it’s a realistic goal and interesting idea. Assuming that there are intelligent species out there, they should also transmit data over radiofrequencies like we do. For example, our radio and TV signals have already travelled dozens of lightyears and might have reached other species. Seti@Home listens for non-natural signals in frequencies that we are receiving – it tries to filter out the background noise of space and looks for any artificial signals which can’t originate from natural phenomenons.

Imagine you’re the one Seti@Home user that finds and processes the first extra-terrestrial signal! Not only you’d be famous, you could also be pretty proud of yourself.

Now don’t think that BOINC is taking away all your computers resources so that working on it gets impossible. The BOINC-client has numerous settings that you can use to restrict the processing to only the part you’re not using. That allows you to either let it running all the time and use unused resources, or you configure it as screensaver; that ensures that BOINC is only working while you’re not using your machine anyway. See below for a screenshot of the BOINC screensaver and all related important links you’ll need:

Seti@Home at work


Using Google Chrome? Or Internet Explorer? What’s wrong with you?

With lack of understanding for such people, I’m wondering about those people still using Internet Explorer for their daily browsing. Okay, for a while it was fast and easy to use – but now the only reason to use IE should be for testing stuff on multiple browsers.

Before you agree with me: I don’t understand why people are using Google Chrome on their Desktop machines either. Agreed, it is fast – I admit, before I learned about Chromium, I’ve been using it on Desktop and Mobile as well. But now? Nah!

Let’s summarize why Chrome is bad:

  • Location services: By default, Chrome transmits your location and god knows what other stuff to Google. Even when disabling all the related settings and installing all the privacy extensions there are, Chrome keeps happily transmitting your location in many ways – which brings us to the next point:
  • Traffic snooping: Think what you want, but even analyzing all the traffic Chrome sends won’t reveal what it’s doing while you’re not looking. Google has high interest in seeing what you do with your browser. You shouldn’t use GoogleDNS either, although it’s damn fast. Why do you think they offer a free, public DNS service, if not for collecting all your domain queries? Google knows everything, and that’s not just restricted to their search machine.
  • Closed source: Although Chrome is based on the open-source browser Chromium (which by the way should be preferred over Chrome for exactly this reason), the public can’t peek into the source to see what wrongdoings are in there. So feel free to expect things in there that you wouldn’t want in there.
  • Mainstream: Most people I know using Chrome are using it – besides the obvious speed advantage – just because everyone else is using it. Can that be a reason to do something? Have a bridge nearby?

The list would go on, but I’m sure you get the point. You don’t think there is a good alternative with the same advantages? Then you didn’t look well enough. Keep reading!

  • Speed: If you’re using Chrome for the performance advantage, use Firefox Aurora/Nightly with speed add-ons like FasterFox and MemoryFox– oh, and don’t forget to use TCPOptimizer anyway.
  • False sense of privacy: If you seriously think that browsing with Chrome keeps your traffic private and secure, you’re a lost cause. At least consider using Chromium instead – here you can be sure that someone is watching the sourcecode for things that don’t belong in there.
  • Easy & Simple for Newbies: Okay, Chrome is made intuitive and simple, but c’mon, they’ve gone over the top with that. Would you really admit that using Firefox is too complicated for you? Is it that hard?

Again, I could go on – but I’m sure you get the point. Now for quick access and overview, here’s all the software you really need:

  • Firefox Aurora: Aurora is the Beta version of Firefox – so by using it, you can enjoy updates, optimizations and many other advantages earlier than users of the normal Firefox version can. It’s been tested by all the Nightly users, so no need to fear bugs or other problems.
  • Firefox Nightly: Nightly is the alpha version of Firefox – all the new features, improvements and other nice things you can already enjoy long before Firefox Standard or Aurora users can. But expect crashes and bugs every now and then, it’s not a beta – it’s an alpha version. Make sure to try the Android version – I love it!
  • Addons FasterFox and MemoryFox: Using this extensions for Firefox improves browsing and overall system performance significantly. Try using the custom setting of FasterFox and play with all the settings, you won’t be disappointed. Also – MemoryFox has the nice feature of also improving the memory usage of other apps on your system as well.
  • TCPOptimizer: A must-have tool for every Windows user; it tweaks lots of system-settings and can improve the throughput and latency of your internet connection dramatically. For tweaks on other operating systems, check out HMA’s Speed tweaking article.
  • Chromium: Chromium is the open-source webbrowser that Google Chrome is based on. That should be more than enough of a reason to use it.

Yeah, that’s pretty much it. Ahya, and note that Chromium, Firefox Nightly/Aurora are available for all major OS, even mobile!

BoincTasks: Multi-Host, OS, Language BOINC progress watcher

Today I’d like to bring your attention to a nice tool I’ve started using recently: BoincTasks
If you’re running Boinc on multiple devices, you’ve probably noticed that there’s no proper way or tool to view the progress of all your hosts together. The usual Boinc-watchers can only connect to one host. That’s over now, thanks to BoincTasks.Although the interface needs a bit getting used to and you may spot small glitches or bugs, the advantages of this tool are clearly in the majority:
  • View an unlimited amount of hosts
  • Tons of options and settings to play with
  • Also offers interface via webserver, so usable on every internet capable device
  • Replaces the Boinc GUI
  • It’s completely free
  • Lots of languages included
  • Support for Win, Mac, Linux (though Mac+Linux might need a bit tweaking to get it running)
  • Offers a widget to see progress in small window all the time
 This is the interface served via webserver, viewed on my SGS4:
Related links:

Widget to see your progress while doing other stuff:

SanDisk Cruzer Fit USB Flash Drive – Review

While looking for the smallest USB stick with the most space, I stumbled upon the SanDisk Cruzer Fit – available in 4, 8, 16, 32, 64 GB with same size.

The reviews showed that the performance was poor, but expected with that tiny size. The 64 GB version is far too expensive (more than triple what the 32 GB costs), so I decided to get the 32 GB version for below 20 EUR.

AS SSD Benchmark shows me this performance:
Seq: Read=19,08 MB/s, Write=3,35 MB/s
Access time:  Read=1,395 ms Write=8,096 ms

So I’m okay with the performance – all in all, the only negative thing with this product is that the little ear for attaching the stick onto a keyring is far too small for usual keyrings.
Means, you either need supersmall keyrings, or attach it with a string.
Good is that the case doesn’t get loose or falls off, and that the ear for attaching is on the stick, not the case.

I can recommend this (at least the 32 GB version) to anyone who wants to have as many GBs as possible – on the smallest space possible. Perfect for backup, portable apps, and all other data you might possibly need on-the-go.



Documentary: Seconds from Disaster S06E01 – Norway Utoya Massacre

Never watching “real” TV and instead only watching downloaded series all the time has one disadvantage – lots of stuff happens that one doesn’t know about. Watching news seems to be important after all, it seems.

So while browsing through Wikipedia’s toplists of the most horrific catastrophes and massacres, I’ve stumbled upon the “List of rampage killers” – as usual, sortable by victim number – must love Wikipedia! *g*
Anyway, I must have been in a coma or sleeping or whatever, but for some reason I was completely unaware of what happened on July 22nd 2011 in Norway – I’m speaking of the Oslo bombing – which itself is less spectacular, but connected to the Utøya massacre.

And as expected, for any catastrophe there is a “Seconds from Disaster” episode – in this case S06E01, title: “Norway Massacre – I was there“. Have fun:

New advanced setting in uTorrent beta: vpn.dark_mode

Users of the latest beta from uTorrent might have noticed a new setting in the “Advanced” tab called “vpn.dark_mode“. Interesting is that neither the uTorrent help, uTorrent forums or Google know anything about this new setting!

The only effect it has for me is that all transfers stop. Connecting/disconnecting to VPN before or after modifying this setting (on/off) didn’t change anything.

So I’ll use my good Google ranking for finding out what this setting may mean… does anyone have an idea? Could it be related to “Dark Fibre“? Please comment!

X-Chat Perl script for Auto-Goodbye with nohang-delay

Things that worked easily with mIRC scripting can get complicated when trying the same with x-Chat, e.g. in Perl. The idea was to make a script that listens for certain terms like “goodbye everyone” and then responds with “bye $nick” after a certain delay.

That can easily done with the sleep command, but this results in letting the xChat process hang completely for the time of the delay, ignoring user-input.

So I googled for a way to achieve this, but couldn’t find anything. Lastly, doing the whole thing with threads was a working solution;

use Xchat qw(:all);
use threads;

Xchat::register( "Auto-Goodbye", "0.1" );

    Xchat::hook_print('Channel Message', \&check_term);

    sub check_term { if (($_[0][1] =~ /^gtg/i) 
              or ($_[0][1] =~ /^bye everyone/i) 
              or ($_[0][1] =~ /^cya everyone/i) 
              or ($_[0][1] =~ /^goodbye everyone/i) 
              or ($_[0][1] =~ /^bye people/i)) 

               { $othernick = Xchat::strip_code($_[0][0]);
              $thr = threads->new(\&sub1);
                  sub sub1 { sleep 5; Xchat::command("msg ". Xchat::get_info('channel') ." bye ".$othernick);  
            }                                 }

          return Xchat::EAT_NONE;

X-Chat Perl script to hide joins/parts/quits/voices/devoices per nickname or host

You know that annoying join/part messages in IRC?

* arie_ has disconnected (SSL Connection closed)
* arie joined #xchat (
* arie has disconnected (Connection closed)
* arie joined #xchat (
* arie_ has disconnected (A TLS packet with unexpected length was received.)

You probably know that you can easily disable them in xChat globally by running
/set irc_conf_mode 1

or per channel by rightclicking the channel tab, selecting Settings -> Hide Join/Part Messages

But what if you only want to hide joins/parts/quites/voices/devoices per nickname or host?
So that only for some nicknames/hosts those messages are displayed, while for others they are not displayed? I searched a long time for a script like this but couldn’t find one that worked right for me, so I modified it a bit.

  • Here the perl script that does this job for you :)
    Download the .pl zipped here:
    Extract the .pl file somewhere, then load it via xChat menu.

Note that you probably need to install ActivePerl 5.12.

Samsung Galaxy S4 i9505 review, root and recovery installation

SGS4Yesterday I received my SGS4 – finally. Having skipped the SGS3 but being very satisfied with my SGS2 in the past, I decided to pay the high price of 599 € for the SGS4.

Now before going over to the Pros and Cons of it, some basic but important information first that you should consider before getting the SGS4.

  • Speed: Depending on where you live, you can get either the i9500 or the i9505 – or you import the other version for a little more cash. According to my tests and the scores of AnTuTu-benchmark, the differences are rather small but obvious:
    1. Fastest: i9500 (tweaked)
    2. Fast: i9500 (stock)
    3. Slower: i9505 (tweaked)
    4. Slowest: i9505 (stock)
    I don’t think you’ll notice the speed differences anywhere except in benchmarks; both versions are still much faster than other currently avail. smartphones. Still, basically the i9500 can be considered better than the i9505.
  • Color: watch what color-version you get exactly. When getting the “black-mist” color version, don’t expect it to be black. The phones back rather looks like the front of a microwave, very ugly. Of course you can just buy a cover of your favorite color separately.
  • Battery lifetime: the included battery (2600 mAh) simply sucks. No wonder with all that speed and gimmicks, so I recommend to get either a double-battery with extra back-cover (5500 mAh) or a normal-sized battery with at least 3500 mAh. Otherwise you’ll get annoyed by having to charge the SGS4 1-2 times daily.
  • MicroSIM: the SGS4 is using MicroSIM-cards. So either you get one, or cut your current SIM to a MicroSIM using the helpful image from my other blog post.
  • Moving apps to external SD: Very annoying is the fact that you cannot move apps or app-data to your external SD card with the current stock ROMs, so your internal storage will be full after installing a few apps (e.g. the integrated 16GB are actually only 9.25 GB, the rest is used for the system). The currently best workaround against this problem is using the great app Foldermount, which allows to create symlinks and move folders (like large app-data folders) to the external SD card.

Root and recovery installation

I’ve been using CF-Root and TWRP Recovery, other methods did not work for me.

Download: Odin v3.07 incl. SGS4i9505 CF-Root + TWRP Recovery
(Enter download mode by press and holding Volume Down, Home and Power, then flash the .tar.md5 and .tar via PDA in Odin)

Link: XDA thread for TWRP Recovery:

Link: XDA thread for Chainfire CF-AutoRoot:


Pro SGS4 Contra SGS4
  • Bigger display (5″)
  • Sharper + brighter display
  • Speed
  • Higher resolution (FullHD 1080p)
  • Extras (Adapt sound, OCR, Face control, etc.)
  • Infrared (try SmartRemote app!!)
  • Price
  • Battery lifetime
  • Not many custom ROMs avail. yet
  • Integrated space is actually 6.75 GB less (9.25 instead 16 GB)




Getting OpenVPN on ChromeOS working

Many users of ChromeOS (e.g. on ChromeBooks or on virtual machines) probably noticed that they can’t connect via OpenVPN. This happens because ChromeOS at the moment only supports rather uncommon certificates/keys for it.

That leaves only L2TP as protocol of choice, since PPTP is not supported at all by ChromeOS.

But with a little workaround you can get OpenVPN working. ChromeOS is just another Linux distribution, so you can go into terminal mode and connect manually.

How this can be done is explained in the tutorial I wrote about it, you can find it here:

How to put the GoogleAnalytics code on MediaWiki into header instead of body

There are to ways to enable GoogleAnalytics for MediaWiki:

One is to use the extension Google Analytics Integration – it’s easy and works fine, but puts the script into the pages body instead of the header. That makes no difference in regards of it working properly, but it’s not the way Google wants us to do it.
The alternative is to just put the code into the skin.
Let’s say you’re using the Vector skin. Open the file /skins/Vector.php and search for this text:

$out->addHeadItem( 'csshover',
'<!--[if lt IE 7]><style type="text/css">body{behavior:url("' .
htmlspecialchars( $wgLocalStylePath ) .

Below it, enter the following (while replacing the profile data with yours, of course)

   $out->addHeadItem( 'analytics',
            '<script type="text/javascript">'."

  var _gaq = _gaq || [];
  _gaq.push(['_setAccount', 'UA-00000000-1']);
  _gaq.push(['_setDomainName', '']);
  _gaq.push(['_setAllowHash', 'false']);

  (function() {
    var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
    ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '';
    var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);


Lastly, remove any usage of GoogleAnalytics related extensions from your LocalSettings.php to prevent double-use of the script. Now check your real-time stats in GoogleAnalytics to see if the script is active.

Alternatives to Google Play Android Market

Most people just download their apps at Google Play and don’t even know that there are alternatives – good ones.

For example:

Found more recommendable Android app markets? Leave a comment :)

9/11 – Inside WTC – Documentary (Naudet)

Although it’s now almost 12 years since the event, and everybody was bombarded with footage, watched videos over and over again – this one is a must-see. If you haven’t seen this documentary yet which was actually planned by the 2 French Naudet brothers to be just about the daily life of a firefighters squad, and then turned into one of the most important documentaries ever – then it’s time. It’s the only footage existing that shows the collapse of the towers from within them. I ripped the DVD to get the best quality and removed the black borders, that means this video has a higher quality than all other versions you’ll find online. Best viewed with Firefox or Chrome.

Getting VPN to work on Proxmox OpenVZ container (VPS)

When trying to connect via OpenVPN on my Proxmox-based OpenVZ VPS, I always received this error message:

SIOCSIFADDR: No such device: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
SIOCSIFMTU: No such device
SIOCSIFBRDADDR: No such device: 
ERROR while getting interface flags: No such device
Linux ifconfig failed: external program exited with error status: 255

After googling a while, I found the fix for that. You need to modify the file “/etc/vz/vz.conf” on your host machine.
Look for the line “## IPv4 iptables kernel modules“.
The line below it should begin with “IPTABLES=“. Set it to this:

IPTABLES="ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp"

Next, run the following commands, while replacing “VEID” with the container ID of the container you want to have access to the hosts modules. (e.g. 100, 101, etc.)

vzctl set VEID --devices c:10:200:rw --save
vzctl set VEID --capability net_admin:on --save
vzctl exec VEID mknod /dev/as0t0 c 10 200
vzctl exec VEID chmod 600 /dev/as0t0

Restart the corresponding container and try to connect to the VPN. Worked fine for me :)

In case the VPN connects fine, but the OpenVPN process tells you
“unable to redirect default gateway — Cannot read current default gateway from system”, just add a default route; like this:

route add default dev tun0

You can easily check your current IP before and after by running this (package “curl” is required though):


Freetz custom firmware for AVM FritzBox 7270 v3 routers

FreetzWith the instructions from (alt. newbie version) I’ve built a few firmware images for my AVM! FritzBox 7270 v3. So if you have that router and don’t want to build the firmware by yourself, you can download my version here:

It contains all many features, plugins, modules and everything else that sounded interesting during the selection in the compiling process.

You might also want to check out the image by hehnblog, he included his .config file, so you can use it as template for building your image. Included packages are amongst others: dsld, ip commands from the iproute package, dnsmasq, dropbear, traceroute, tcpdump, and iptables. Based on the German image.

Download: 7270_v3_05.50-freetz-devel.de_20130329-122017.image_config.tar



  • If the AVM webconfiguration refuses to install freetz, your options are:
    switch the Annex drivers between A and B and/or remove the branding, then try again. I’ve done that with ruKernel (Download). It’s German but website has English tutorials
    flash Freetz with ruKernel. I had to start it with parameter “-u2” to make the process work
  • Version 1.0: Due to the size limit for images, the archive contains an .external file that you can flash within the freetz webconfiguration onto an external USB device.
  • Version 2.0: This one is using the integrated Downloader for installation of apps. Plugin an USB stick, set the downloader to use
  • Version 3.0: Changed some settings and added even more packages.
  • Having login problems? Disable password as explained here.
  • I’ll keep optimizing the image and expanding its functionality and post future updates here. Let me know if you need a custom build with certain options or packages.
Version 2.0 + 3.0: Downloader usage to install additional apps:

Freetz Downloader


Questions? Leave a comment!

Don’t know what freetz is?
It’s a linux based operating system for Fritzbox routers, which is far more advanced than normal firmwares, allowing the installation of many different applications and server software, e.g. Torrent-client, VPN-clients/servers, Proxyservers/clients, etc.

Cutting SIM to MicroSIM to NanoSIM

Cutting instructions

Many cell service providers don’t send out Nano-SIM cards, which are needed for e.g. the iPad-mini. They expect you to order a normal SIM and once received, call their hotline to get the Nano version. This can take weeks and of course is annoying.

I found this image very useful, which helped me cutting down my SIM first to a MicroSIM and then down to a NanoSIM. Make sure to rather cut less and often than much.

Work on it till you can insert the NanoSIM into the cardholder, so that it’s not falling out by itself.
Worked fine for me :)

PiTool cmd v0.1 – Command-line tool for the Raspberry Pi

Following the GUI-based PiTool v0.2, there’s PiTool v0.1 CMDnow a command-line version available.


  • full system upgrade
  • install/run hexxeh’s firmware update tool
  • show CPU temperature
  • show voltages
  • show clock frequencies
  • clear RAM
  • show internal+external IP
  • show MAC address, sent+received bytes and megabytes

Download: (142 KB)

Except for showing voltages and clock frequencies, all functions also work on various other ARM-based devices, such as Cubieboard, OLinuXino, Hackberry, ODroidX etc.

As always, I’m open for suggestions on what other things might be useful to add to the app – via comment or email.

Alternate Universe – a MUD taking worth a look at! :)

I was never really into MUD games, found ’em boring without graphics. But this one, “Alternate Universe“, is really taking a look at. You have to solve a puzzle at the beginning (hint: look for a button to push *g*), then you come into the area where other players are. The possibilities are basically endless – and the most interesting part – its server runs on a Raspberry Pi!
To play, just telnet into 1063 – or use the applet below:

Using Raspberry Pi as a VPN router alternative

I’ve written 2 tutorials on how you can use any Linux device, e.g. the Raspberry Pi, but also similar devices like Linux-on-Android or even a virtual machine as VPN router.

Tutorial No. 1 explains how to use a local proxyserver on your linux device to share an OpenVPN connection along your network. You can even connect from outside of your network; in addition, this allows even devices with no VPN support to use the VPN connection. You will just need a little tool called tinyproxy, allow the client IPs and + needed ports in the tinyproxy.conf and connect to the VPN.

Tutorial No. 2 explains how to use a local PPTP server on your linux device to share an OpenVPN connection along your network. You can even connect from outside of your network; this method has the advantage that certain apps will not fallback to use your real IP, and your complete system is secured by the VPN – instead of only applications that support the use of proxies.

See here:

Debian image for the ODroid-X2

ODroid-X2If you’re in need of a Debian image for the ODroid-X2 – you can just use the one from the X, download here: odroidx-debian-R2.rar (Magnet / Torrent). User/Pass is “odroidx“.

The image contains a 3 GB filesystem. When flashing it on a bigger SDcard using w32diskimager (odroid edition),  you can resize the filesystem later on the X2 by running “resize2fs /dev/mmcblk0p3” (not working? Then you need to recreate the 3rd partition. Here’s a log that shows you how I did it)

Don’t know what the ODroid-X2 is? It’s the fastest and best single-board-computer you can get at the moment. Where to get it? Here:


Processor:     Samsung Exynos4412 Cortex-A9 Quad Core 1.7Ghz with 1MB L2 cache
Memory:     2GB LP-DDR2 880Mega data rate
3D Accelerator:     Mali-400 Quad Core 440MHz
Video:     supports 1080p via HDMI cable(H.264+AAC based MP4 container format)
Video Out:     micro HDMI connector / RGB-24bit LCD interface port
Audio:     Standard 3.5mm headphone jack and microphone jack
LAN:     10/100Mbps Ethernet with RJ-45 Jack ( Auto-MDIX support)
USB2.0 Host:      High speed standard A type connector x 6 ports
USB2.0 Device:      ADB/Mass storage(Micro USB)
Display:     HDMI monitor / LCD panel with RGB or LVDS interface
Storage:     Full size SDHC Card Slot, eMMC module socket
Power:    5V 2A Power
System Software:     u-boot 2010.12, Kernel 3.0.15, Android4.0.x(ICS)
Size:      90 x 94 mm

Bitcoin mining on arm/armhf devices such as the Raspberry Pi

Method 1) Mining via Android via LTCMiner
If you have a single-board-computer that runs Android (such as the Cubieboard, Gooseberry, APC Rock, OLinuXino, Hackberry etc.), you can just use the app LTCMiner. For downloads, see my blog post “Finally a working bitcoin miner for Android

Method 2) Mining on Linux via UFAMiner

apt-get install -y --force-yes lzma libpcre3-dev
tar --lzma -xvpf ufasoft_bitcoin-miner-0.32.tar.lzma
cd ufasoft_bitcoin-miner-0.32
make install
./bitcoin-miner -o

Method 3) Mining on Linux via CPUMiner

cd cpuminer-master
apt-get install -y --force-yes curl libjansson-dev libjansson4 automake autoconf
./ CFLAGS="-O3 -Wall -msse2" 
make install
./minerd --url --userpass Username:Password


You might want to use StratumProxy rather than mining on a Pool directly, to make sure your miner is using the best mining methods.
Unfortunately devices like the Pi, OLinuXino, Hackberry, Cubieboard etc. only give around 290 khash/sec.

Measuring the maximal network throughput of your network devices

Speed checkThere are times when you might want to measure the maximal network throughput / bandwidth of your network devices via LAN or WLAN. This is especially useful if you want to compare the results between e.g. your wired Raspberry Pi, the wireless OLinuxino, Hackberry… or you just want to check if getting expensive network cables was worth it.

A pretty easy tool for doing this is PCATTCP / TTCP, download it here ->

Linux (source):
(to compile the Linux source, just enter “make” and then start it via “./ttcp“)

The how-to can be found @
But it’s pretty easy. Here’s what you need to enter:

To let a host wait for a TCP test: ./ttcp -r
To let a host wait for a UDP test (faster): ./ttcp -r -u

To do a TCP test with a host: ./ttcp -t
To do a UDP test with a host (faster): ./ttcp -t -u

A possible output looks like this:

ttcp-t: buflen=8192, nbuf=2048, align=16384/0, port=5001  udp  ->
ttcp-t: socket
ttcp-t: 16777216 bytes in 5.59 real seconds = 2928.80 KB/sec +++
ttcp-t: 2054 I/O calls, msec/call = 2.79, calls/sec = 367.17
ttcp-t: 0.0user 1.9sys 0:05real 35% 0i+0d 290maxrss 0+3pf 162+29018csw

For lots of Windows-related speed tweaks, see this Wiki article: Speed

Monitoring your Raspberry Pis as a cluster using Ganglia

Ganglia graphsIf you own multiple Raspberry Pis or other single-board-computers, you might want to have a way to view and compare their processor and network usage as well as other system-related data.

A good tool for this is Ganglia, and it’s pretty easy to setup; just run
apt-get install ganglia-monitor gmetad
on every computer that you want monitored. Ganglia is pretty lightweight, uses just around 5% CPU usage every few seconds.

Then you need to select a device that should host the webinterface to display all the data.
Make sure this device has apache2 and php5 installed (by just running “apt-get install apache2 php5“). On this device you extract the content of the “ganglia-web-3.5.7” folder from this archive (download) into the /var/www folder.

That’s pretty much it – when now accessing the selected device via browser, you should see the Ganglia webinterface. It will automatically pick up all devices in the network that have Ganglia installed, and regularly produce informative graphs and usage data.
See their wiki for a quick-start guide:

If you’re looking for a good way to administrate and configure your Pi via webinterface, you should use Webmin; see my post CPanel vs. Webmin

Getting the A13-OLinuXino-WIFI to work

Today I received my A13-OLinuXino-WIFI, mainly to be able to compare it with the Raspberry Pi and Cubieboard. As with the Cubieboard, Android is preinstalled on the NAND integrated storage of the OLinuXino A13. I decided to get the Wifi version (just $10 more) since I liked the idea of having a single-computer-board with WLAN without having to use an external WLAN dongle.

Now to spare you some trouble, I recommend to install the “Video-enabled A13 Debian Image, R10” (mirror / Flashmirrors), otherwise you’ll have no video output. For other images, see:

The user/pass are: root : olinuxino and there’s also a olinuxino : olinuxino user.
Once logged in, you might want to change the password via “passwd”.
Now you need to configure the network for the WLAN to work.
Run “ifconfig -a“. It should show you a loopback, a tun and a wlan device.
Important is here the number behind “wlan“, so “wlan1“, “wlan2” etc.

Next, open /etc/network/interfaces with nano or whatever editor you prefer.
Change the number behind the “wlan” here accordingly as ifconfig has shown you, so if the interfaces file says “wlan1” and ifconfig told you “wlan2“, make it “wlan2” here as well on both places (auto wlan2 + iface wlan2 inet dhcp). Then change the ssid and the psk accordingly as your WLAN is set.

So your interfaces file should look like this:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

auto wlan2
iface wlan2 inet dhcp
wpa-ssid mywlanssid
wpa-key-mgmt WPA-PSK
wpa-psk mywlanpsk

To make the changes have effect, run “service networking restart“.

That’s all – you should have net access now. If not, check the interfaces file for any mistyping. You might also want to edit your WLANs security settings, for me it worked while using WPA/WPA2 TKIP.

Some info about the A13 OLinuXino-WIFI:

Olinuxino A13 WifiFEATURES

  • A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
  • 512 MB RAM (2 x 256Mbit x 8)
  • 4GB NAND flash
  • 3 USB + 1 Mini-USB hosts
  • 1 USB OTG which can power the board
  • Android OS preinstalled on the NAND memory
  • SD-card connector for booting optional Linux image
  • VGA video output
  • Audio Output, Microphone Input
  • RTC PCF8536 on board for real time clock and alarms
  • 5 Keys on board for android navigation
  • Dimensions: 120 x 120 mm (4.7×4.7”)

My benchmarks: 192 Whetstones, 2142 Dhrystones (tested with BOINC)

PiTool GUI v0.2 – Useful tool for Raspberry Pis

PiToolI made a little tool with Lazarus for Raspberry Pis which might come in handy,
check it out – Current features:

  • Display CPU temperature
  • Display network usage (received+sent traffic)
  • Display MAC address
  • Display all clock frequencies
  • Do full system upgrade
  • Clear memory
  • Console
  • Display voltages
  • Display LAN and external IP

Download: PiTool GUI v 0.2 (855 KB)

Of course there’s also a command-line based version available: pitool-cmd

I’d like suggestions on how to improve the tool, e.g. other useful information to be displayed, more commands, etc. Let me know via comment or email.

The next release will be able to:

  • Display routing tables
  • Catch all possible exception errors
  • Install/run Hexxeh’s update tool
  • Modifying boot.txt and cmdline.txt for tweaking

Getting Seti@home to work on Android devices

NativeboincUPDATE (28th March 2013): NativeBoinc now supports Seti@home without needing to use workarounds like the one below!!

Although there is NativeBoinc for Android, Seti@home will not work when being added as a project with it.  There are rumors about an Android client from the Boinc developers which will hopefully include full support for all projects on various Android systems.

Till then, you’ll have to use a workaround to get Seti@home working on your Android device, by compiling and running Boinc on Linux within Android, and using NativeBoinc as manager only. Here is how to:

1. Your device needs to be rooted. Install Linux Deploy and ConnectBot.

2. Install your favorite Linux distribution with Linux Deploy; enable SSH with it and connect to Linux via SSH.

3. Make sure that you’re logged in as root. Now enter:

wget && chmod +x && ./

4. This will take a while. When done, make sure you’re in /var/lib/boinc and start boinc in daemon mode:

boinc --daemon --allow_remote_gui_rpc

5. Lookup your account key:

boinccmd --lookup_account password

6. Add the project to boinc:

boinccmd --project_attach the-key-you-just-got

7. Now start NativeBoinc, let it connect to the client running on localhost. Don’t start the integrated boinc client – just connect to the running one on localhost.

This method has the disadvantage that you have to run Boinc via Linux on your Android device, and you have to start it there manually each time you want to use Seti@home. But it works :)

Comparison Raspberry Pi vs. Cubieboard

After playing around a lot with my 2 Raspberry Pis and being pretty satisfied with it, today I received my Cubieboard. Specification comparison:

Raspberry Pi Model-B
Developer: Raspberry Pi Foundation
Operating system: Linux
Power: 3.5 W (model B) via Micro-USB
CPU: ARM1176JZF-S (armv6k) @ 700 MHz
SoC: Broadcom BCM2835
GPU: VideoCore IV
RAM: 512 MByte (Model B rev 2)
Storage: SD card slot (SD or MicroSDHC card), USB
Graphics: Broadcom VideoCore IV
Video: Composite, HDMI
Audio: 3.5mm jack, HDMI
Network: 10/100 RJ45
Other: 2x USB
Dimensions: 85,60 x 53,98 x 17 mm
My benchmarks: 273 Whetstones / 1108 Dhrystones (tested with BOINC)
Manufacturer: CubieTech
Operating system: Android preinstalled, Linux via MicroSDHC or SATA
Power: via Mini-USB or DC
CPU: ARM Cortex-A8 @ 1Ghz
SoC: Allwinner A10
GPU: ARM Mali-400
Integrated storage: NAND 4GB
Video: HDMI
Audio: 3.5mm jack, HDMI
Network: 10/100 RJ45
Storage: MicroSDHC, SATA (+5v power), USB
Other: Infrared, 2x USB
Dimensions: 10cm x 6cm x 2cm
My benchmarks:  199 Whetstones / 2000 Dhrystones (tested with BOINC)

The advantage of the Pi is that it’s widely being used, so there is much more specialized software for it available, more information on the net, etc.
The advantage of the Cubieboard is clearly its better hardware; I especially like that it comes preinstalled with Android, and you can easily install Linux on a SDHC card or on an attached SATA hard drive – where the SATA slot is another advantage, of course.
If you need to decide – should you be after the faster mini-linux computer, get the Cubieboard. If you’re more after playing around with it and programming, get the Pi :)
BUT: If you’re after max. speed, you have to get the ODroid-X2!

There are other mini computers besides the Pi and Cubieboard, see below for links of all that are worth mentioning:

Pi vs. Cubie

You might also want to check out this site: – it contains a comparison table of this boards: Arduino, Raspberry Pi, CubieBoard, Gooseberry, APC Rock, OLinuXino, Hackberry A10
Also informative: Wiki articles “List of single-board computers” and “Comparison of single-board computers“.

Raspberry Pi hints, tips and tricks

Pi rocks!Below I’ve compiled a list of useful things regarding the Raspberry Pi that I found along the web:

Install hexxeh’s rpi-update tool:
sudo wget -O /usr/bin/rpi-update && sudo chmod +x /usr/bin/rpi-update

Get CPU temperature:
vcgencmd measure_temp
(you can also watch the temperature by running “watch -d vcgencmd measure_temp”)

Get CPU temperature in milli-centigrades:
cat /sys/class/thermal/thermal_zone0/temp
(same as above, watch it via “watch -d cat /sys/class/thermal/thermal_zone0/temp”)

Get amount of network adapters received bytes:
cat /sys/class/net/eth0/statistics/rx_bytes
Get Megabytes:
awk ‘{printf(“%.1f\n”,$1/1024/1024)}’ “/sys/class/net/eth0/statistics/rx_bytes”

Get amount of network adapters sent bytes:
cat /sys/class/net/eth0/statistics/tx_bytes
Get Megabytes:
awk ‘{printf(“%.1f\n”,$1/1024/1024)}’ “/sys/class/net/eth0/statistics/tx_bytes”

Get the Pi’s MAC address:
cat /sys/class/net/eth0/address

Show CPU clock frequency:
vcgencmd measure_clock arm
Show all available clock frequencies:
for src in arm core h264 isp v3d uart pwm emmc pixel vec hdmi dpi ; do echo -e “$src:\t$(vcgencmd measure_clock $src)” ; done

Show core voltage:
vcgencmd measure_volts core
Show all voltages:
for id in core sdram_c sdram_i sdram_p ; do echo -e “$id:\t$(vcgencmd measure_volts $id)” ; done

the mentioned folders contain more possible values, but imho none of them are really interesting or useful. Let me know if you found anything else and I’ll add it here. Thanks!

Stop wasting your computers idle time, CPU power and bandwidth!

Billions of computers are running without doing anything, or at least without fully using their processing power and bandwidth. What a waste! Why not using your computers idle time for something useful, e.g. to fight diseases, share information and software, or crawl the web? See below for examples what you can let your computer/server do while you’re not using it:

  • apt-p2p: This linux-based package aims to reduce the usage of Linux distribution hosts by sharing packages to other users via DHT. Give it a try!
  • yacy: Yacy is a decentralized search-engine. You can install it on your computer or server and crawl the web, contributing to Yacy or creating your own search engine with it. Check it’s wiki. There’s also a science-related Yacy version called ScienceNet
  • boinc: With boinc you can let your CPU and GPU work for a good cause. It offers many projects for different aims, e.g. finding cures for diseases, predicting earthquakes, search life in outta space, etc. There’s also an Android client!
  • bitcoins: Why not letting your server or computer earn bitcoins for you, that you can even sell for real money? I’m using ufaminer for this on the pool (which seems to be better than in my opinion)
  • sharing torrents (e.g. legal torrents, linux distributions, illlegal torrents *g*): Just download torrents you’d like to share and make known, e.g.  debian or others and share them as long as you like and can spare bandwidth.

Really good Android apps

There are tons of android apps, but most of them simply suck. There’s also lots of sites that review apps, but they suck as well. So see below for apps that are REALLY worth installing:

[UPDATE!] Getting Seti@home to work on Raspberry Pi (and other armel/armhf devices)

As mentioned in an earlier post, you can use NativeBoinc to use BOINC on Android devices. But what about Raspberry Pi and other ARM/ARMHF devices?
When installing BOINC on Raspberry Pi, you might notice that only certain projects support armel/armhf devices. Unfortunately this excludes Seti@home and some other projects, resulting in them not working at all.
There’s a fix for this now, checkout this page:

It offers a quick-start guide and downloads that you can use to make projects like Seti@home working on armel/armhf devices such as the Raspberry Pi.
Basically you just need to delete the content of the directory /var/lib/boinc/projects/
and download setiathome_enhanced and app_info.xml into it. Make sure to assign the projects folder to the boinc user v
ia “chown -R boinc:boinc projects/” while in the boinc main folder.
Lastly, attach the Seti@home project to Boinc as explained here.

I’ve compiled the Seti@home binaries on multiple devices, you can find binaries for Raspberry Pi, Cubieboard, OLinuxino A13, Samsung Galaxy S2 and Asus Transformer 101(G) at

Download the file that fits for your device, rename it into “setiathome_enhanced” and put it together with the app_info.xml into the /var/lib/boinc/projects/ folder. Start boinc and use boinccmd to attach the project only while you’re in the /var/lib/boinc folder!

If that won’t do the trick for you, you’ll need to compile boinc+setiathome yourself, reboot, et voila – it works!
Now your Raspberry Pi is finally searching for Aliens out there 😉
The easiest way to compile Seti@home and Boinc is to use my script:

Some notes to spare you stress and wondering while compiling:

  • You should purge all boinc related software before starting (apt-get purge boinc*)
  • If the scripts demand for libtoolize, install it via “apt-get install libtool
  • If the boinc client gives you authorization errors, you’re in the wrong directory; just change to the boinc data directory (the one that contains the subfolder “projects” – standard should be /var/lib/boinc) and try again
  • If boinc still refuses to get tasks because of incompatible system,
    delete the content of the directory /var/lib/boinc/projects/
    and download setiathome_enhanced and app_info.xml into it
  • Getting absent file or checksum errors? Copy the compiled executable from /usr/local/src/seti_boinc/client (should be named e.g. “setiathome-6.97.armv6l-unknown-linux-gnu“) to /var/lib/boinc/projects/ as “setiathome_enhanced“. Make sure the app_info.xml is in the same path.
  • At the end you might want to install the boinc-manager (apt-get install boinc-manager). It asks you if it’s supposed to replace existing parts – make sure to select “n” for no.


I’ve put together a script you just need to run for compiling and configuring boinc+setiathome, see below. Of course all credits go to Daniel Carrison, who made the original.
Just download this script:, chmod +x it (chmod +x and then run it (./

Now you might want to install boinc-manager via apt-get. Make sure to not replace any existing data!
Next, start BOINC in daemon mode using the daemon parameter; you might also want to add the allow_remote_gui_rpc parameter (uses the password from the file gui_rpc_auth.cfg) to be able to view boincs status on external devices via manager:

boinc --daemon --allow_remote_gui_rpc

Now lookup your account key and add the project to BOINC:

boinccmd --lookup_account password
boinccmd --project_attach thekeyyoujustgot

Again – running boinc or boinccmd must be done in /var/lib/boinc folder!
If you did all correctly, Seti@home will now start to work after a few downloads (e.g. check CPU usage with “top”).
This is the time to start the boinc-manager on your favorite GUI.

If you prefer viewing BOINC in console, kill it (killall boinc) and start it undaemonized (boinc).

Please leave a comment if this isn’t working for you or you’re experiencing any issues.
For possible issues and fixes, please scroll up to my notes.
Of course I’d also be happy about any positive feedback :)

Quake 1, 2 and 3 for Android

If you need the game data, download the original games e.g. from piratebay:


Theme Hospital for Windows, Mac, Linux and Android

Theme Hospital ScreenshotFinally the opensource remake of Bullfrog’s “Theme Hospital” is available for Android as well, after it was only available for Win, Mac and Linux before:

Download for Win, Mac, Linux:

Download for Android:

Download for Android incl. Game Data:

Why uploading to one hoster when there’s multi-uploading?

Why would you want to upload just to e.g. Rapidshare or, when there’s websites and tools that upload your files simultaneously to multiple, even hundreds of hosters?

You might already know places like, or – all pretty good, but limit the amount of used mirrors in some way.
(check this link for more web-based multi-uploaders)

Also take a look at this 2 tools – they allow you to upload your files to hundreds of different file-hosting services automatically:

USB drives mounted on Raspberry Pi via Samba – but why read-only?

When plugging in your USB drives (or sticks) into the Raspberry Pi, they get automatically mounted and are accessible. So far, so good. The next step is to make them accessible over the networ, even for Windows PCs. Here are 2 good tutorials on how to do that (I personally had to mix them to get it working):

Unfortunately my drives were mounted read-only, and when I wanted to change that via Webmin, my commands were refused.

Googled a while, the trick was this:

  1. Install ntfs-3g (apt-get install ntfs-3g)
  2. Modify /etc/fstab like this (nano /etc/fstab):


/dev/sda1       /media/Serien   ntfs user,dev,errors=continue,relatime,mft_zone_multiplier=1,fmask=0177,nosuid,dmask=077,exec,nls=utf8 0       0


/dev/sda1       /media/Serien   ntfs-3g user,dev,errors=continue,relatime,mft_zone_multiplier=1,fmask=0177,nosuid,dmask=077,exec,nls=utf8,uid=pi,gid=pi 0       0

So by changing “ntfs” to “ntfs-3g” and adding “uid=pi,gid=pi” and lastly, rebooting the Raspberry Pi I was finally able to write on my HDs and sticks.

Finally a working Bitcoin-Miner for Android!

Even when it’s just a few dozen kilohashes you’ll get with this miner, it’s still a nice project.
And with improving hardware and improving of the miners code, I’m sure there will be even more possible.

The code of LTCMiner can be found here ->

Finally a working BOINC-client on Android

Finally there is a working BOINC-client for Android. And not just one of this useless managers that just display your work status from another device. A real BOINC-client!

Even Seti@home is working on it since 28th March 2013!

Total Video Converter + Ultra Video Converter

There are plenty of video converter apps out there, but the best are certainly Ultra Video Converter (Win) and Total Video Converter (Win); simply because they support all video and audio formats on the market, are small and easy to use. I recommend to just install both, in case the converting result of one is not as expected.

Total Video Converter HD 3.71: Magnet + Multiupload + MirrorCreator + FlashMirrors

Ultra Video Converter 5.1.0108: Magnet + Multiupload + MirrorCreator + FlashMirrors


Total + Ultra Video Converter

Anonymous email inbox + anonymous email sending

There’s different approaches to fetch and send emails as anonymously as possible, for example trashmail-services and anonymous mailer applications.

Unfortunately trash-mail services usually can’t be used via POP3/IMAP and so are only web-based; but the best anonymous email inbox service is for sure the one from HideMyAss, since it offers the most features (like auto-expiration and notification emails):

Emails sent with anonymous mailer apps usually never arrive because they are considered spam somewhere along the way. But I found a working one, which delivered all my test emails properly: the Mixminion Message Sender: (Website)

Anonymous Mailer HideMyAss Anonymous Email
Ahya, and for anonymous browsing there’s of course the webproxy:

IP and system-check

You should be aware that your browser reveals much information about you – see below for some examples (turn off AdBlock if you don’t see anything). For how it’s done, check the sourcecode. You can use browser-addons like Ghostery (Firefox + Chrome) and NoScript (Firefox) / NotScript (Chrome) to stop your browser from giving away this and other information.

Test everything here in this example (click!)

New place for HideMyAss-related and general tools + apps

All available general and HideMyAss-related tools and apps are now to be found on the page “HideMyAss Apps & Tools” as displayed here ->

Just in case you were wondering where the tools

  • Quicklink-Traytool
  • Windows PPTP + L2TP Dialer
  • OpenVPN GUI Login-Tool
  • IP and VPN-Check
  • Random Server Connector
  • WebProxy Browser
  • UNrouting Utility
  • HMA-TrayTool

have gone… :)


Easily installing Firefox, SeaMonkey and Thunderbird on Debian

There are plenty of different ways to install Firefox on Linux – which you should do, since Iceweasel or other standard-browsers keep crashing or just don’t have the same functionality. However, the easiest way is to just run this in terminal:

apt-get remove iceweasel
echo -e "\ndeb all main" | sudo tee -a /etc/apt/sources.list > /dev/null
sudo apt-key adv --recv-keys --keyserver C1289A29
sudo apt-get update
sudo apt-get install firefox-mozilla-build
sudo apt-get install thunderbird-mozilla-build
sudo apt-get install seamonkey-mozilla-build
apt-get install firefox-mozilla-build

Check the Ubuntuzilla project for a how-to of installing Thunderbird, Seamonkey, etc.


Learning MacOS X with Leopard 10.5.5 on VMware Workstation

If you worked all your life on Windows computers, and then suddenly encounter a Mac system – this might be problematic, especially if you’re supposed to know basic Mac stuff; e.g. for Work or when you suddenly find yourself on a Mac via remote desktop. That’s why it’s a good idea to train yourself a bit on a virtual machine. Unfortunately I was unable to get newer MacOSX versions running, only Leopard worked out-of-the-box. Downloads below:

Download MacOSX 10.5.5
Leopard VMWare Image:


Download VMware Workstation
v8.0.1.528992 incl. Keygen:

Mac OSX Leopard VMware

South Park – Censored Episodes S05E03 + 200 + 201 – Share and seed it, because censorship sucks!

Unfortunately 3 South Park episodes are not available on the (international!!) South Park – pages. So you have to download them via torrent, or watch them here :)Mohammed

South Park – S05E04 – “Super Best Friends”: Magnet Link + TorrentWatch online
Stan, Kyle, Cartman and Kenny discover David Blaine, magician and cult leader, performing in the streets of South Park. Stan finds out early that the Blainiacs are not as nice as everyone thinks. He tries to convince the other boys they’ve been brainwashed, but they have forsaken their friends and families. Teaming up with Jesus, Stan calls upon all the Super Best Friends to destroy the magician and thwart the mass suicide pact he has launched.

South Park – 200: Magnet Link + Alt. Magnet Link Watch online
This show marked South Park’s 200th episode. Led by Tom Cruise, two hundred celebrities, previously ridiculed by the town of South Park, file a class action lawsuit. They demand immunity from ever being made fun of again. When Stan begs them to accept his apology, they offer impossible terms and the boys ask the Super Best Friends for help.

South Park – 201: Magnet Link + Watch online
In the exciting conclusion to this two-part blockbuster celebrating South Park’s 200th episode, angry celebrities, violent ginger kids, and Mecha Streisand face off against the Super Best Friends and the South Park faithful. It’s a destructive battle on the largest scale, but all everyone wants to know is, “Who is Eric Cartman’s father?”

You can watch them online and download here -> Banned South Park Episodes @ HTML5 MP4 Player

CPanel vs. Webmin

I’m currently considering getting a $15 CPanel license for my server, since installing it as CPanel vs. Webminsome cracked version didn’t work.

Up till now I’ve been using Webmin, which actually offers the same functionality as CPanel – but it’s just not as nice and easy.

For those who don’t know Webmin, check it out:

Quick install – just run:
apt-get install perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl apt-show-versions python && wget && dpkg –install webmin_1.620_all.deb

Together with Virtualmin and Usermin you can do any server-related administrative actions that you need.

Switching from Gnome to LXDE? Good idea.

When I was using Gnome3 on Debian-Wheezy, I experienced the issue that gnome kept creating new processes of “gdm-simple-slave” – hundreds of them, slowing my server down extremely.
I was unable to find the cause of this issue, however, bugs like that are to be expected when using Wheezy. So I decided to try LXDE again. On my previous attempt this was problematic, because tightvncserver refused to work with it and kept bringing me to my old Gnome desktop – although I followed instructions to reconfigure tightvncserver correctly. Now I gave it another try, with different instructions. It worked – now I’m happily using LXDE on my server, instead of gnome. And that infinite-process problem is gone. Here’s how to:

LXDE DesktopRemove GNOME:
apt-get purge gnome*

Install LXDE and tightvncserver if not done yet:
apt-get install tightvncserver lxde

Edit the vnc config with e.g. nano:
nano /root/.vnc/xstartup

In nano, uncomment the line
so it looks like this:

At the end, add this lines:
icewm &

Save. When now running
and connecting to your server,
you should see your LXDE desktop. Have fun!

German crime series: Autopsie – Mysteriöse Todesfälle + Medical Detectives + Quincy

For all German-speaking fans of series like Autopsie, Medical Detectives, Akte Mord, Ungeklärte Morde, etc. and Quincy here some fine downloads and links (all German):

  • Autopsie – Mysteriöse Todesfälle (Complete – 164 Episodes)Autopsie + Medical Detectives

Setting up virtual machines on your dedicated server with Proxmox

As you may know, you can easily afford the costs of a dedicated server by just creating virtual machines on it for yourself and your friends. Just rent a few additional IPs (usually around 1€/IP), et voila! Everyone has his own server.

The easiest method to achieve this is using Proxmox – I’d prefer that over VMware, Xen etc.; A tutorial for setting it up on a existing debian installation can be found here:

Something you should know: If you don’t want to fight with the network configuration on both host machine and VMs, better create containers (CTs) instead of virtual machines (VMs). Although you then may be restricted to use Linux distributions and have less possible settings, it will surely save you a lot of stress, time and effort.

And – when creating containers, you’ll most likely do this with templates. Note that proxmox by default seems to only offer 32 bit (i386) templates of various Linux distributions, for whatever reason. Download the 64 bit (amd64) templates to /var/lib/vz/template/cache from before you create your containers, so you can select the desired template in Proxmox.

Fun things to do with your own dedicated (or virtual private) server

Now that servers have become affordable, everybody can get one. There are quite a few fun things to do with an own server, for example:

  • Mining Bitcoins: Why letting your server idle around, doing nothing? Let it mine bitcoins for you! I’m using ufaminer for this on the pool (which seems to be better than in my opinion)
  • Sharing your CPU power: Let your server search for extraterrestrial life in space with Seti@home using boinc-manager
  • Seeding torrents: Why not using the great bandwidth of servers to seed torrents?
  • More fun stuff to do: Running servers for games, SMTP, VPN, DNS, FTP – or be a powerful Gnutella or DC hub, TOR relay etc.

I can recommend dedicated servers at Webtropia and Netrouting. You should always prefer a dedicated server, since virtual private servers usually always have limitations regarding what you’re allowed to do with them, how much CPU power you may use etc.

Your own free Cloud with unlimited space

One annoying fact with Cloud services like Dropbox, Asus Webstorage or is their space limit. Usually its a few GB, which you can extend by referring new users, or you have to pay for it. Mostly more than the space is really worth, and still you cannot save your whole HD on it.

Now there is ownCloud:
It works the same way as Dropbox, and has the same functionality.
Just install it on your webspace (easiest via Softaculous) and configure it.
I recommend getting cheap and good webspace e.g. from

You can get the ownCloud clients for Windows, Mac and Linux
And download the Android client from here:

Et voila – you have your own cloud, whose space is only limited by your webspace amount; and since webspace is cheaper (or even free from Zymic) than “usual” cloud services, this is the best way to make your data accessible from anywhere.

Problems compiling JediVCL? Quick fix available!

When installing the JediVCL for Borland Delphi, you might get the following error messages:

Error: \jvcl\run\JvPageSetup.pas(1): Illegal character in input file: ‘ï’ ($EF)
Fatal: JvDlgs.dpk(86): Could not compile used unit ‘..\..\run\JvPageSetup.pas

This can easily be fixed by editing the files JvDialogs.pas and JvPageSetup.pas
(located in folder \jvcl\run) with NotepadPad++.
In the Notepad++ menu, select “ANSI” under “Encoding” and save the files.

Now try to install JVCL again – should work fine :)
You can also download a fixed JCL+JVCL setup version from here:

Edit: This problem seems finally to have been fixed in newer JediVCL versions.

How to fix Clockworkmod Recovery boot loop issue

In case you installed Clockworkmod Recovery onto your Android device, you might encounter a serious bug that results in booting into Recovery each time. The only way to get into your system is a “cold-boot” (keep pressing power+VolDown, then select Android).

A complicated and long way to fix this is explained @

But if your device is already rooted, this is much much easier. Before you test the method described now, please read all the comments to this article. Users of some devices (like Asus Transformer) report that this fixed the problem, while users of other devices (e.g. SGS+) reported a soft-brick as result. Be careful – you’re doing this on your own risk!

Open a terminal window, e.g. with Android Terminal Emulator from

Now, enter “su” to get root access. Superuser might ask you for authorization.

Then enter

echo boot | dd of=/dev/block/mmcblk0p3 bs=1 seek=0

(please triple-check for mistyping!!!)

Reboot. Your device should now work normal again.
Hope it worked so easily for you as it did for me on my Transformer TF101G.


  • As you can read in the comments to this blog post, using this method works great for some devices, while it seems to have resulted in a soft-brick for other devices (e.g. SGS+) I strongly recommend to first research the web for alternative ways to fix the bootloop issue which are ESPECIALLY MADE FOR YOUR DEVICE. I also recommend to collect links to unbrick tutorials (see xda forums, Google and Youtube), so you immediately have some tools ready to unbrick your device. You might be required to reflash original-firmware or custom ROMs on your device in the end.
  • The “cold-boot” way to get into your system (as described in this blog post) is only available for certain devices, like the ASUS Transformer 101(g). Some custom recovery systems also have a terminal-feature that you could try to run the command on. If your device does not offer a cold-boot or any way to get into terminal-mode, your options are
    a) try all wipe/format/reset options within Clockworkmod Recovery until you’re get into your system again (note that of course all your data will be lost)
    b) download either the original firmware for your device or a custom rom and flash it to your device. You can do this with Clockworkmod Recovery or from your computer via USB, using adb and 3rd party tools. This will also overwrite your bootloader and fix the bootloop issue. For links and downloads, please check all subforums for your device in the xda forums.

Setting up VPN on iOS and Android devices

Should you experience problems with connecting to a VPN on iOS or Android devices via PPTP protocol, first thing to try would be L2TP protocol. Should you also experience problems here, it’s time to use OpenVPN.

On iOS, you need to have a jailbroken device. On Android devices, there are 2 ways to connect via OpenVPN; one without need of root access using FeatVPN (a tutorial for this will follow) and one where root is needed. Find the instructions here:

Kylix 3.0 Enterprise and Open Edition – Delphi for Linux

Ever tried Kylix 3.0 Enterprise or Open Edition for Linux? If yes, tell me how you managed to install it – it seems to be just incompatible with newer Linux distros… according to my trials and lots of sources on the web.

Download Kylix 3 Enterprise here:

Download Kylix 3 Open Edition here:

Lots of free Android apps

iPad? Never-ever again!

After I bricked 2 Android tablets, I decided to give the “New iPad” (iPad3) a try.
That was the first and last time I bouth an apple product. Here just one of many cons:

  • no built-in file explorer
  • not possible to download free apps without giving out billing info
  • too small (below 10 inch)
  • password must be entered every few clicks
  • iOS is for newbies and children, not for advanced users
  • not really customizable

Good, old, customizable Android. How I miss it! Ergo – never buy an Apple product!

If you need to decide – I can not recommend those cheap tablets like the Viewsonic 10s – they easily get broken and can’t even be reset’ed. Better get the Asus Transformer TF101G – it’s worth the money!